Repair HP Laptop Black Screen

Repair HP Laptop Black Screen

Full Guide: How to Fix HP Laptop Black Screen

We’ve all been there. You turn on your HP laptop, expecting it to boot up as usual, only see a dreaded black screen. Don’t panic! Today, we will delve deep into the issue of the HP laptop automatic repair black screen, providing solutions to help you get back on track. With the right steps, your HP laptop can run smoothly again in no time.


Understanding HP Laptop Black Screen Problem

Firstly, let’s understand the problem. The HP laptop automatic repair is a built-in Windows feature designed to diagnose and rectify any issues preventing your system from starting correctly. However, sometimes, instead of fixing problems, this tool can get stuck, resulting in the black screen. But, why does this happen?


Causes Behind the HP Laptop Black Screen

Ideally, users can get a black screen due to different reasons. In this, the system doesn’t respond or boot correctly. Instead, it displays a black screen or later restarts the automatic repair (on a loop). The following reasons can cause your HP laptop to prepare automatic repair of black screen. There are several reasons why your HP laptop might face this challenge:

Corrupted System Files: Just like any machine, your HP laptop relies on a set of instructions to function. Over time, these files can corrupt, leading to issues like the black screen.

Hardware Malfunction: Faulty RAM, hard drive, or any other hardware component can also be the culprit.

Software Conflict: Sometimes, newly installed software can interfere with the system boot process.

So without wasting time, follow the possible solutions given:


Getting to the Solution for HP Laptop Black Screen

The ideal fix can be applied by identifying the most likely causes of the computer’s black screen prompt. This is important because some fixes require tweaks to be made to the computer’s system, including the BIOS (Basic Input/Output System), depending on the issue.

Consider external causes first, such as a damaged display cable, before exploring technical possibilities. With that in mind, here are some possible ways for you to resolve a frozen black screen on a computer:


Before Windows sign-in

Fix connection issues with the monitor

  • Check the computer’s video cable for any external damage.
  • If there’s none, remove and reconnect the video cable from the computer to the monitor to see if that does the trick.
  • If the screen is still blank, test both the cable and the monitor by doing the following:
    • Cable
      • Use another cable available at home (used by the TV, another laptop, etc.) to connect the computer with the monitor.
      • If the monitor works, the initial cable is damaged and needs to be replaced.
    • Monitor
      • Test the video cable between the computer and a different monitor (the TV, another monitor, etc.).
      • If the new monitor displays images perfectly, the original monitor is damaged and needs to be replaced.


Refresh the screen via Windows key sequence

  • Click the CapsLock or NumLock keys to see if any indicator light turns on (the computer is properly running but cannot activate the screen).
  • If any of the keys’ lights turn on, then:
    • Press Ctrl Alt Delete, prompting the administrator menu to appear.
    • Select your account and sign in as usual.
    • If unable to sign in, click the “Power” icon and then choose “Restart” to reboot the PC.
    • If the computer freezes at a black screen again, the last resort is to forcibly shut down the PC by pressing and holding the computer’s power button for around 10 seconds.
  • If any of the keys do not light up, proceed to:
    • Manually shut down the computer by pressing its power button for around 10 seconds.
    • Remove the power adapter from the computer and its power source for about 30 seconds.
    • Plug it back in, then restart.
    • If you are still stuck on the black screen, try another fix below.


Roll back the display driver/adapter (via Safe Mode)

  • A recent change to your PC – most notably a Windows update – can stop the display adapter (graphics card, etc.) from functioning correctly.
  • If it’s still stuck on an empty, black screen, a computer restart in Safe Mode will be required to safely revert the display adapter’s driver to a previous version.
  • After booting the PC in Safe Mode, open the Search bar and type in “Device Manager.”
  • Select the Device Manager program, and find Display Adapters.
  • Under the Display Adapter tab, all the PC’s current display adapters will be shown (e.g., Intel HD 4000, Nvidia RTX 3060).
  • Right-click on the display adapter that is suspected to be causing the black screen problem, and then open Properties.
  • Find the Driver tab, select Roll Back Driver, and press “Yes” to execute the process.
  • Once the process is done, restart the computer to see if the black screen problem has been fixed.


Prompt a System Restore (Automatic Repair mode)

  • After a couple of forced shutdowns – due to failure to boot up properly after getting stuck at a black screen – the computer will automatically enter its Automatic Repair phase during the next restart.
  • It will attempt to troubleshoot black screen issues that could interrupt the computer’s safe startup, giving a few options to choose from.
  • If the Automatic Repair screen appears, users can instruct Windows to return to its previous working state via System Restore. Here’s how to do it:
    • Click on Advanced Options from the actions provided.
    • Go to Troubleshoot.
    • Proceed to Advanced Options again.
    • Choose System Restore among the many solutions shared.
  • In Automatic Repair, users can also reset the computer to its basic state or opt for other repair actions instead of System Restore, such as Startup Repair or System Image Recovery, if necessary.


After successfully signing in to Windows


Refresh the screen via Windows key sequence

  • This time, press the Windows key + Ctrl Shift b to force a refresh of the video display/adapter.
  • You will hear a short beep before the screen turns off, restarting afterwards. If successful, you can solve the black screen issue.
  • If the black screen persists, move on to another method.


Restart the Windows Explorer program

  • If a frozen Windows Explorer program could be the cause behind the PC’s black screen error, try restarting it:
    • Press Ctrl Alt Delete to open the admin menu.
    • Select Task Manager.
    • Open the Processes tab, and then highlight Windows Explorer.
    • Right-click Windows Explorer and choose Restart.
  • If the monitor continues to show a black screen, try starting a new Windows Explorer program instead, using Task Manager:
    • Open File located in the top-left corner.
    •  Choose “Run new task.”
    • Type “explorer.exe,” and then click “OK.”


Roll back the display driver/adapter (via Safe Mode)

  • If a recent update to the PC’s display driver is a likely cause, users can revert it to a previous working version by following the necessary steps:
    • Turn on the computer in Safe Mode.
    • Use the Search bar to type in “Device Manager.”
    • Open the Device Manager program, and then select Display Adapters.
    • Right-click on the suspected display adapter (e.g. AMD Radeon HD 7600M, etc.) and choose Properties.
    • Click on the Driver tab, select Roll Back Driver, and press “Yes” when prompted.
    • Restart the computer to check if this resolves the black screen problem.


Prompt a System Restore (Automatic Repair mode)

  • After failing to start multiple times, the desktop/laptop will automatically enter the Automatic Repair screen on the next boot up/restart from a manual shutdown.
  • If so, here’s how to prompt a System Restore from the Automatic Repair screen:
    • Choose Advanced Options on the screen.
    • Select Troubleshoot.
    • Click on Advanced Options again.
    • Select System Restore to revert Windows to a previous working state.
  • Users can also try Startup Repair and Startup Settings if deemed appropriate.


Additional Tips for an Optimized HP Laptop Experience

To prevent future black screens and to keep your laptop running smoothly:

  • Regularly update your system.
  • Use trusted antivirus software.
  • Avoid downloading files from untrustworthy sources.
  • Schedule regular system check-ups.
  • Consider investing in solid-state drives (SSDs) for better performance.



Facing the HP laptop automatic repair black screen can be daunting, but equipped with the right knowledge, it’s a challenge you can overcome. With the tips provided, not only can you resolve the current issue, but you can also optimize your laptop for future use. So the next time your HP laptop throws a curveball, you’ll be ready to hit it out of the park.

Make sure to follow them carefully to avoid further issues. I hope the articles work for you. But if there is anything that I missed out, then feel free to share it with us on our website!


You might also like...